GMC Canyon II facelift (2020-2022) (part of steering rack) wiring diagram
This page shows the only wiring diagram for the component.(part of steering rack), which is found in the car GMC Canyon II facelift (2020-2022). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
(part of steering rack) wiring diagram (1 of 1)
BATTERY FUSE BLOCK
BLK WIRE
BLK/BLU WIRE
BLU WIRE
BLU/GRY WIRE
BLU/YEL WIRE
BRN/BLK WIRE
BRN/RED WIRE
COMPUTER DATA LINES SYSTEM
DRIVER INFORMATION CENTER DISPLAY
GROUND 10
GROUND 11
GRY/GRN WIRE
HIGH SPEED GMLAN SERIAL DATA (-) (1)
HIGH SPEED GMLAN SERIAL DATA (-) (2)
HOT AT ALL TIMES
INSTRUMENT CLUSTER
LOGIC
LOW SPEED GMLAN SERIAL DATA 2
POWER STEERING CONTROL MODULE (POWER STEERING RACK ASSEMBLY)
POWER STEERING MOTOR
POWER STEERING SHAFT TORQUE SENSOR
PRIMARY FUSED BATTERY POSITIVE VOLTAGE 8
RED/BRN WIRE
RED/VIO WIRE
SECONDARY FUSED BATTERY POSITIVE VOLTAGE 59
SERIAL DATA COMMUNICATION ENABLE
TORQUE INPUT SENSOR HIGH REF
TORQUE INPUT SENSOR LOW REF
TORQUE INPUT SENSOR SIGNAL
UNDERHOOD FUSE BLOCK
WHT WIRE
WHT/BLU WIRE
WHT/ORG WIRE
Go to component -> Electronic power steering circuit -> (PART OF STEERING RACK)
