Ford Mondeo V facelift (2019-2023) passenger load limiting retractor wiring diagram
This page shows the only wiring diagram for the component.passenger load limiting retractor, which is found in the car Ford Mondeo V facelift (2019-2023). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
passenger load limiting retractor wiring diagram (1 of 1)
BATTERY ENERGY CONTROL MODULE (BECM)
BATTERY ENERGY CONTROL MODULE B (BECMB)
BLK/WHT WIRE
BLU WIRE
BLU/BRN WIRE
BLU/ORG WIRE
BLU/WHT WIRE
BRN WIRE
BRN/BLU WIRE
BRN/GRN WIRE
BRN/RED WIRE
COLLAPSIBLE STEERING COLUMN MODULE
COMPUTER DATA LINES SYSTEM
DRIVER LOWER AIR BAG
DRIVER SEAT BELT ANCHOR PRETENSIONER
DRIVER SEAT BELT RETRACTOR PRETENSIONER
ENS
FUSION MKZ
GRN WIRE
GRN/ORG WIRE
GRN/VIO WIRE
GRY WIRE
GRY/BLU WIRE
GRY/ORG WIRE
GRY/VIO WIRE
GRY/YEL WIRE
HS CAN+
LEFT C-PILLAR SIDE IMPACT SENSOR
NCA WIRE
OCS OUT
PASSENGER AIR BAG
PASSENGER LOAD LIMITING RETRACTOR
PASSENGER LOWER AIR BAG
PASSENGER SEAT BELT ANCHOR PRETENSIONER
RCM OUT
RIGHT C-PILLAR SIDE IMPACT SENSOR
SHORTING BAR
STAGE 1
STAGE 2
VBATT
VENT
VIO WIRE
VIO/GRN WIRE
VIO/GRY WIRE
VIO/WHT WIRE
VPWR
WHT WIRE
WHT/BLU WIRE
WHT/GRN WIRE
WHT/ORG WIRE
YEL WIRE
YEL/BLU WIRE
YEL/GRY WIRE
YEL/ORG WIRE
YEL/VIO WIRE
Go to component -> Supplemental restraints circuit, hybrid (2 of 3) -> PASSENGER LOAD LIMITING RETRACTOR
