Ford Kuga II (2012-2016) (base of right "d" pillar) Wiring diagrams
This page contains all the electrical diagrams for the component. (base of right "d" pillar), in which he is found in the car Ford Kuga II (2012-2016). You can view various wiring diagrams where this component is used, as well as go to more detailed diagrams to see the complete connection and interaction in the system. All diagrams have links to quickly jump to the corresponding section with the component for easy viewing..
(base of right "d" pillar) wiring diagram (1 of 2)
BISLERT
BLK/BLU WIRE
BLK/GRN WIRE
BLK/VIO WIRE
BLK/WHT WIRE
BLU WIRE
BLU/RED WIRE
BRN WIRE
COMPUTER DATA LINES SYSTEM
DRIVER DOOR MODULE (DDM)
FUSE 29
FUSE 4
FUSE 5
GRN WIRE
GRN/RED WIRE
GRN/WHT WIRE
GRY WIRE
GRY/ORG WIRE
GRY/RED WIRE
GRY/VIO WIRE
HOT AT ALL TIMES
HOT W/ ACCESSORY RELAY ENERGIZED
LEFT EXTERIOR MIRROR
LEFT EXTERIOR MIRROR BLIND SPOT (BLIS)/ CROSS TRAFFIC ALERT (CTA) LED
LEFT SIDE OBSTACLE DETECTION CONTROL MODULE (SOD-L)
MS CAN +
MSX CAN +
NCA WIRE
NSX CAN+
PASSENGER DOOR MODULE (PDM)
REAR JUNCTION BOX (RJB)
RED WIRE
RETURN
RIGHT EXTERIOR MIRROR
RIGHT EXTERIOR MIRROR BLIND SPOT (BLIS)/ CROSS TRAFFIC ALERT (CTA) LED
RIGHT SIDE OBSTACLE DETECTION MODULE (SOD-R)
START/RUN
VBATT
VIO WIRE
VIO/ORG WIRE
YEL/VIO WIRE
Go to component -> Blind spot information system circuit -> (BASE OF RIGHT "D" PILLAR)
(base of right "d" pillar) wiring diagram (2 of 2)
AUDIO UNIT
BLU/GRY WIRE
DRIVER DOOR MODULE (DDM)
DRIVER SEAT MODULE (DSM)
EARLY PRODUCTION
FRONT CONTROL/ DISPLAY INTERFACE MODULE (FCDIM)
FRONT CONTROLS INTERFACE MODULE (FCIM)
GRY WIRE
GRY/ORG WIRE
I CAN -
IMAGE PROCESSING MODULE (PM-B)
LATE PRODUCTION
LEFT SIDE OBSTACLE DETECTION CONTROL MODULE (SOD-L)
MS CAN +
MSX CAN +
ORG/ WIRE
PASSENGER DOOR MODULE (PDM)
REAR GATE TRUNK MODULE (RGTM)
REMOTE FUNCTION ACTUATOR (RFA) MODULE
RIGHT SIDE OBSTACLE DETECTION CONTROL MODULE (SOD-R)
TRAILER MODULE
VIO/GRY WIRE
VIO/ORG WIRE
W/ DOOR MODULES
W/ POWER LIFTGATE
W/ SYNC GEN 1 (4.2 INCH DISPLAY)
W/ SYNC GEN 2 (8 INCH DISPLAY)
WHT WIRE
WHT/BLU WIRE
Go to component -> Computer data lines circuit (2 of 3) -> (BASE OF RIGHT "D" PILLAR)
