Ford Focus II facelift (2007-2011) brake pedal ms sw can+ Wiring diagrams
This page contains all the electrical diagrams for the component. brake pedal ms sw can+, in which he is found in the car Ford Focus II facelift (2007-2011). You can view various wiring diagrams where this component is used, as well as go to more detailed diagrams to see the complete connection and interaction in the system. All diagrams have links to quickly jump to the corresponding section with the component for easy viewing..
Wiring diagram brake pedal ms sw can+ (1 of 2)
13 43 59 BPP HS CAN - HS CAN +
2 1 15 14 22 MS CAN+ MS CAN- HS CAN+ HS CAN- TCS ON/OFF
BATTERY JUNCTION BOX (BJB) (LEFT REAR CORNER OF ENGINE COMPT)
BLK WIRE
BLK/GRN WIRE
BLK/VIO WIRE
BLU WIRE
BLU/ORG WIRE
BLU/WHT WIRE
BRAKE PEDAL MS SW CAN+
BRN WIRE
BRN/GRN WIRE
CLUS GND
CLUS PWR
COMPUTER DATA LINES SYSTEM
FUSE
FUSE 2
FUSE 31
GRN WIRE
GRN/ORG WIRE
GRN/VIO WIRE
GRY WIRE
GRY/BRN WIRE
GRY/ORG WIRE
GRY/VIO WIRE
HOT AT ALL TIMES
HOT IN START OR RUN
HS CAN + HS CAN -
HS CAN YAW - HS CAN YAW +
IGN SAS B
INSTRUMENT CLUSTER (IC)
IVD RTN SAS A RR WHL SPD- RR WHL SPD+
IVD SIG BPP
LEFT FRONT WHEEL SPEED SENSOR (LEFT FRONT WHEEL HUB)
LF WHL SPD+ LF WHL SPD-
LR WHL SPD LR WHL SPD
MS CAN +
NCA WIRE
ORG/ WIRE
PAD INDICATOR/ TRACTION CONTROL/ AMBIENT LIGHTING SWITCH
POSITION SWITCH)
POWERTRAIN CONTROL MODULE
RED WIRE
RIGHT REAR WHEEL SPEED SENSOR (RIGHT REAR WHEEL HUB)
SMART JUNCTION LOGIC BOX (SJB) (BEHIND LEFT SIDE OF DASH) BRAKE FLUID SW
SOLID STATE
STABILITY CONTROL SENSOR CLUSTER
STEERING ANGLE SENSOR MODULE (LEFT SIDE OF DASH)
TRACTION ON/OFF SWITCH
VBATT RF WHL SPD- RF WHL SPD+
VIO WIRE
VIO/BRN WIRE
VIO/ORG WIRE
VIO/WHT WIRE
WHT WIRE
WHT/BLU WIRE
WHT/ORG WIRE
YEL WIRE
YEL/GRY WIRE
YEL/RED WIRE
Go to component -> Anti-lock brakes circuit, with dynamic stability control -> BRAKE PEDAL MS SW CAN+
Wiring diagram brake pedal ms sw can+ (2 of 2)
2 1 15 14 22 MS CAN+ MS CAN- HS CAN+ HS CAN- TCS ON/OFF
BATTERY JUNCTION BOX (BJB) (LEFT REAR CORNER OF ENGINE COMPT)
BLK WIRE
BLK/GRN WIRE
BLK/VIO WIRE
BLU WIRE
BLU/ORG WIRE
BRAKE FLUID LEVEL SWITCH (TOP OF MASTER CYLINDER RESERVOIR)
BRAKE PEDAL MS SW CAN+
BRAKE PEDAL POSITION SWITCH (BRAKE PEDAL SUPPORT BRACKET)
BRN WIRE
BRN/GRN WIRE
COMPUTER DATA LINES SYSTEM
FUSE
FUSE 2
FUSE 31
GRN WIRE
GRY WIRE
GRY/ORG WIRE
GRY/VIO WIRE
HOT AT ALL TIMES
HOT IN START OR RUN
HS CAN+
IGN HS CAN-
INSTRUMENT CLUSTER (IC)
LEFT REAR WHEEL SPEED SENSOR (LEFT REAR WHEEL HUB)
LF WHL SPD+ LF WHL SPD-
MS CAN +
NCA WIRE
ORG/ WIRE
PAD INDICATOR/ TRACTION CONTROL/ AMBIENT LIGHTING SWITCH
RED WIRE
RF WHL SPD+ RF WHL SPD-
RIGHT FRONT WHEEL SPEED SENSOR (RIGHT FRONT WHEEL HUB)
RR WHL SPD RR WHL SPD
SMART JUNCTION LOGIC BOX (SJB) (BEHIND LEFT SIDE OF DASH) BRAKE FLUID SW
TRACTION ON/OFF SWITCH
VBATT
VIO WIRE
VIO/ORG WIRE
VIO/WHT WIRE
WHT WIRE
WHT/BLU WIRE
WHT/ORG WIRE
YEL WIRE
YEL/GRY WIRE
YEL/RED WIRE
Go to component -> Anti-lock brakes circuit, without dynamic stability control -> BRAKE PEDAL MS SW CAN+
