Ford Focus II facelift (2007-2011) battery junction box) breakout to antilock brake system module) Wiring diagram
This page shows the only wiring diagram for the component.battery junction box) breakout to antilock brake system module), which is found in the car Ford Focus II facelift (2007-2011). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram battery junction box) breakout to antilock brake system module) (1 of 1)
1 2 MS CAN + MS CAN -
16 15 MS CAN - MS CAN +
3 4 MS CAN+ MS CAN-
ACCESSORY PROTOCOL INTERFACE MODULE (APIM) (W/ SYNC) (RIGHT SIDE OF DASH)
ANTI-LOCK BRAKE SYSTEM (ABS) MODULE (LEFT REAR CORNER OF
AUDIO CONTROL MODULE (ACM) (CENTER OF DASH)
BATTERY JUNCTION BOX) BREAKOUT TO ANTILOCK BRAKE SYSTEM MODULE)
BLK/VIO WIRE
BREAKOUT TO
BRN WIRE
CENTER CONSOLE
DATA LINK CONNECTOR (DLC) (LEFT SIDE OF DASH)
ENGINE COMPT)
FEPS
FRONT CONTROL INTERFACE MODULE (FCIM) (RIGHT SIDE OF DASH)
FRONT DISPLAY INTERFACE MODULE (FDIM) (CENTER OF DASH)
FUSE 20
GRN/RED WIRE
GRY/ORG WIRE
HARNESS, NEAR BREAKOUT TO
HOT AT ALL TIMES
HS CAN+
HVAC MODULE (CENTER OF DASH)
INSTRUMENT CLUSTER (IC)
MICRO -
MS CAN +
MS CAN - MS CAN +
OCCUPANT CLASSIFICATION SYSTEM MODULE (OCSM)
POWERTRAIN CONTROL MODULE (PCM) (REAR OF ENGINE)
RESTRAINTS CONTROL MODULE (RCM)
SMART JUNCTION BOX (SJB) (BEHIND LEFT SIDE OF DASH)
VIO/ORG WIRE
W/ IVD W/O IVD
WHT WIRE
WHT/BLU WIRE
Go to component -> Computer data lines circuit -> BATTERY JUNCTION BOX) BREAKOUT TO ANTILOCK BRAKE SYSTEM MODULE)
