Ford Explorer VI facelift (2022-2024) joint connector 8 (under driver's seat) wiring diagram
This page shows the only wiring diagram for the component.joint connector 8 (under driver's seat), which is found in the car Ford Explorer VI facelift (2022-2024). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
joint connector 8 (under driver's seat) wiring diagram (1 of 1)
2 2 2.3L TURBO, 3.0L TURBO, 3.3L POLICE
ALL TERRAIN CONTROL MODULE (ATCM)
ALL WHEEL DRIVE (AWD) MODULE
BELT-DRIVEN INTEGRATED STARTER GENERATOR
BLU WIRE
BLU/GRN WIRE
BLU/RED WIRE
BLU/WHT WIRE
BRN WIRE
CAN (+)
DRIVER DOOR MODULE (DDM)
DRIVER MULTI-CONTOUR SEAT MODULE (SCMG)
DRIVER SEAT MODULE (DSM)
EXCEPT POLICE
GRN/BLU WIRE
GRN/ORG WIRE
GRY WIRE
GRY/BLU WIRE
GRY/ORG WIRE
JOINT CONNECTOR 1
JOINT CONNECTOR 2
JOINT CONNECTOR 7
JOINT CONNECTOR 8 (UNDER DRIVER'S SEAT)
MS CAN +
ORG/ WIRE
PEDESTRIAN ALERT CONTROL MODULE (PACM)
POWER FOLD SEAT MODULE (SCMJ)
REAR HEATING, VENTILATION, AIR CONDITIONING (RHVAC) CONTROL MODULE
RED WIRE
SECONDARY ON-BOARD DIAGNOSTIC CONTROL MODULE A (SOBDM)
VIO/BRN WIRE
VIO/ORG WIRE
VIO/RED WIRE
VIO/WHT WIRE
WHT WIRE
WHT/BLU WIRE
WHT/GRN WIRE
Go to component -> Computer data lines circuit (2 of 6) -> JOINT CONNECTOR 8 (UNDER DRIVER'S SEAT)
