Transfer case circuit for Dodge Durango I (1997-2003)

4.7L BLK WIRE BLK/LT GRN WIRE BLK/WHT WIRE DATA LINK CONNECTOR (UNDER DASH LEFT OF STEERING COLUMN) DIAGNOSTIC JUNCTION PORT (UNDER LEFT SIDE OF DASH) DK BLU WIRE DK BLU/WHT WIRE DK GRN WIRE DK GRN/BRN WIRE DK GRN/ORG WIRE DK GRN/VIO WIRE DK GRN/WHT WIRE ENGINE STARTER MOTOR RELAY (IN PDC) EXCEPT 4.7L FUSE 11 FUSE 12 FUSE A GROUND GROUND FUSED (B+) SHIFT MOTOR CTRL A SHIFT MOTOR CTRL B HOT AT ALL TIMES HOT IN HOT IN RUN OR START ILLUMINATION LAMP JOINT CONNECTOR NO 2 (IN PDC) JOINT CONNECTOR NO 3 (IN PDC) JUNCTION BLOCK (ON LEFT END OF DASH) LT BLU/RED WIRE MODE SELECT MODE SENSOR GND GROUND MODE SENSOR B MODE SENSOR A MODE SENSOR C MODE SENSOR D NEUTRAL NEUTRAL IND NEUTRAL LAMP ORG/ WIRE PCI BUS PNK/GRY WIRE POWER DISTRIBUTION CENTER (ON LEFT FRONT INNER FENDER) RED WIRE SUPPLY TRANSFER CASE CONTROL MODULE (RIGHT SIDE OF STEERING COLUMN) TRANSFER CASE SELECTOR SWITCH TRANSFER CASE SHIFT MOTOR (ON UNDERSIDE OF TRANSFER CASE) VIO WIRE VIO/YEL WIRE WHT WIRE YEL WIRE YEL/BRN WIRE YEL/DK BLU WIRE YEL/DK GRN WIRE YEL/LT BLU WIRE YEL/LT GRN WIRE YEL/ORG WIRE YEL/TAN WIRE YEL/VIO WIRE YEL/WHT WIRE