Audi S4 B8 (2008-2011) tail lamp 2 wiring diagram
This page shows the only wiring diagram for the component.tail lamp 2, which is found in the car Audi S4 B8 (2008-2011). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
tail lamp 2 wiring diagram (1 of 1)
"D" PILLAR)
"D" PILLAR) HEADLIGHTS SYSTEM
3.2L 2.0L
BACKUP LAMP
BACKUP LAMPS CIRCUIT
BLK WIRE
BLK/GRN WIRE
BLK/RED WIRE
BLK/WHT WIRE
BLK/YEL WIRE
BLU WIRE
BRAKE LIGHT SWITCH
BRAKE/ TURN/ TAIL LAMPS
BRN WIRE
CLIMATRONIC CONTROL MODULE
CLUTCH POSITION SENSOR (M/T)
COMFORT SYSTEM CENTRAL CONTROL MODULE
COMPT PLENUM CHAMBER) MOTRONIC ENGINE CONTROL MODULE (ECM)
DRIVER'S FUSE CARRIER 2 SIDE FUSE PANEL
DRIVER'S SEAT
ENGINE CONTROL MODULE (ECM)
FOG LAMP
FUSE 2
GRN WIRE
GRY WIRE
GRY/BLK WIRE
GRY/BLU WIRE
GRY/WHT WIRE
GRY/YEL WIRE
HEADLIGHTS SYSTEM
HIGH MOUNT BRAKE LIGHT
LEFT END OF DASH)
LEFT LICENSE PLATE LIGHT
LEFT TAILLAMP ASSEMBLY 1
LEFT TAILLAMP ASSEMBLY 2
MARKER LAMP
OF RIGHT "D" PILLAR)
PEDAL ASSEMBLY)
PLENUM CHAMBER)
RED WIRE
RED/BLK WIRE
RED/GRY WIRE
RIGHT LICENSE PLATE LIGHT
RIGHT TAILLAMP ASSEMBLY 1
SEDAN: LEFT SIDE OF CENTER TUNNEL)
SIDE OF LUGGAGE COMPT)
SIDE OF TRUNK)
TAIL LAMP
TAIL LAMP 1 RIGHT TAILLAMP ASSEMBLY 2
TAIL LAMP 2
YEL WIRE
YEL/RED WIRE
Go to component -> Exterior lamps circuit, avant without led (2 of 2) -> TAIL LAMP 2
