Acura TSX II (2008-2014) driver's seat belt buckle switch Wiring diagram
This page shows the only wiring diagram for the component.driver's seat belt buckle switch, which is found in the car Acura TSX II (2008-2014). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram driver's seat belt buckle switch (1 of 1)
2.4L
2.4L SEDAN, 3.5L 2.4L SPORT WAGON
2.4L W/ NAVIGATION, 3.5L
3.5L 3.5L
ACURA LINK CONTROL UNIT
AUDIO- NAVIGATION UNIT
BLK WIRE
BLU WIRE
DOOR UNLOCK RELAY
DRIVER'S SEAT BELT BUCKLE SWITCH
DRIVER'S SEAT HEATER RELAY (HIGH)
DRIVER'S SEAT HEATER RELAY (LOW)
DRIVER'S SRS SEAT HEATER SHIELD
ELECTRICAL COMPASS UNIT (IF EQUIPPED)
GRN WIRE
HIGH MOUNT BRAKE LIGHT
LEFT "C" PILLAR)
NCA WIRE
REAR WINDOW DEFOGGER
REAR WINDOW DEFOGGER NOISE CONDENSER A
REAR WINDOW DEFOGGER NOISE CONDENSER B
REAR WINDOW LOCK RELAY
REAR WINDOW WIPER RELAY
RED WIRE
RIGHT NAVIGATION DISPLAY REAR POWER UNIT WINDOW (IF SWITCH EQUIPPED)
RIGHT REAR DOOR LOCK ACTUATOR/ KNOB SWITCH
SPORT SEDAN WAGON
SPORT WAGON
STEREO AMPLIFIER
WIND- SHIELD WASHER MOTOR
WINDSHIELD WASHER RELAY
XM RECEIVER (IF EQUIPPED)
YEL WIRE
Go to component -> Ground distribution circuit (6 of 6) -> DRIVER'S SEAT BELT BUCKLE SWITCH
