Acura TL IV facelift (2011-2014) terminals has built-in short contact Wiring diagram
This page shows the only wiring diagram for the component.terminals has built-in short contact, which is found in the car Acura TL IV facelift (2011-2014). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram terminals has built-in short contact (1 of 1)
BLK WIRE
BLU WIRE
BRN WIRE
DRIVER'S SEAT BELT BUCKLE SWITCH (IN DRIVER'S SEAT BELT BUCKLE)
DRIVER'S SEAT POSITION SENSOR (UNDER FRONT OF DRIVER'S SEAT)
FR+B
GRN WIRE
GRY WIRE
LEFT SIDE FIRST IMPACT SENSOR (BASE OF LEFT "B" PILLAR)
LEFT SIDE SECOND IMPACT SENSOR (IN LEFT "C" PILLAR)
LRP- LRP+ RRP- RRP+
LT BLU WIRE
LT GRN WIRE
ODS
ORG/ WIRE
PNK FLB WIRE
PNK WIRE
PPL
REAR SAFING SENSOR (UNDER CENTER OF REAR SEATS)
RED WIRE
RIGHT SIDE CURTAIN AIR BAG INFLATOR (TOP OF RIGHT "C" PILLAR)
RIGHT SIDE FIRST IMPACT SENSOR (BASE OF RIGHT "B" PILLAR)
RIGHT SIDE SECOND IMPACT SENSOR (IN RIGHT "C" PILLAR)
SRS UNIT (UNDER LOWER MIDDLE OF DASH)
SSS- SSS+ LSPS
TERMINALS HAS BUILT-IN SHORT CONTACT
WHT WIRE
YEL WIRE
Go to component -> Supplemental restraints circuit (3 of 3) -> TERMINALS HAS BUILT-IN SHORT CONTACT
