Acura Integra III (1993-2001) integrated control unit ignition input Wiring diagram
This page shows the only wiring diagram for the component.integrated control unit ignition input, which is found in the car Acura Integra III (1993-2001). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram integrated control unit ignition input (1 of 1)
ALL EXCEPT USA RS
BATTERY INPUT
BEEPER
BEEPER OUTPUT
BLK WIRE
BLU/WHT WIRE
DOOR SWITCH INPUT
DRIVER'S DOOR SWITCH (REAR OF LEFT FRONT DOOR)
DRIVER'S SEAT BELT SWITCH (IN DRIVER'S SEAT BELT BUCKLE)
GAUGE ASSEMBLY
GRN/BLU WIRE
GROUND
HOT AT ALL TIMES
HOT IN ON OR START
HOT WITH HEADLIGHT SWITCH IN PARK OR HEAD
I/P LIGHTS FUSE 30
INTEGRATED CONTROL UNIT IGNITION INPUT
INTERIOR LIGHT FUSE 43
KEY SEAT BELT SWITCH INPUT SWITCH INPUT
KEY-IN/ SEAT BELT/ LIGHTS-ON REMINDER CIRCUIT
LIGHTS ON INPUT
LT BLU WIRE
METER FUSE 25
RED/BLU WIRE
SEAT BELT WARNING INDICATOR LIGHT
SECURITY SYSTEM CONNECTOR
STEERING LOCK IGNITION KEY SWITCH
UNDERDASH FUSE/RELAY BOX (UNDER LEFT SIDE OF DASH)
UNDERHOOD FUSE/RELAY BOX (RIGHT REAR CORNER OF ENGINE COMPARTMENT, NEAR BATTERY)
WHT/RED WIRE
YEL/BLU WIRE
Go to component -> Warning systems circuit -> INTEGRATED CONTROL UNIT IGNITION INPUT
